1.1.1 Technical parameters
l Support HomePlug/HomePlugAV2.1.1.2 Manageability
l Support Remote Firmware update(TR069).1.1.3Operating environment
l Working temperature: -40℃-85℃.1.1.4 Design standards
IEC 60529 IEC 50022
Model |
WD-1201M-DIN-M12(T4/V3/D) |
Interface |
1*M12 LAN 10/100/1000Base-TX 1* power interface |
LED display light |
Ethernet PLC Power |
Transfer frequency |
2-68MHz |
Protocol(PHY) |
IEEE802.3,IEEE802.3x, IEEE802.3u HomePlugAV2 |
Security |
128-AES |
Transfer rate(PHY) |
1200Mbps |
Number of each group |
128 |
Modulation |
OFDM |
Effective transfer rate |
TCP/IP 530Mbps |
Manageability |
Remote Firmware update,support TR-069(optional) |
802.1D Ethernet Bridge |
|
802.1Q VLAN |
|
Quality of Service(QoS) |
|
Operating temperature |
-40℃-80℃ |
Size |
120*90*45mm(L×W×H) |
Weight |
0.30kg |
Operating environment |
Operating humidity:10%-85% (no condense) |
Storage humidity: 5%-90%(no condense) |
|
Certification |
FCC、CE class B,WEEE,RoHS |
(1) Packet loss:≤0.1%(100M,load 70%).
(2) Support 7*24 hours all weather operation.
(3) Hardware watch dog function.
(4) PING≤2MS.
(5) M12 shockproof network interface.
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;
Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;
Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
The testing voltage which the device should be beared:
between the power supply voltage port and ground: ±2.0kV;
between signal circuit and ground: ±1.0kV;
repetition frequency: 5KHz, test duration: 1 min/ time;
testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.
The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.
Model: WD-1201M-DIN-M12(T4)
Model: WD-1201M-DIN-M12(V3)
Model: WD-1201M-DIN-M12(D)
Model |
Ethernet Port |
Line Environment |
Network Structure |
WD-1201M-DIN-M12-T4 |
1 |
AC(3 phases+N) |
Network access points and terminals require uniform standard connections (85-520V) |
AC(1 phase+N) |
Single phase without ground (85-520V) |
||
WD-1201M-DIN-M12-V3 |
1 |
AC(3 phases) |
Only three phase connection, and according to the unified standard wiring (85-520V) |
WD-1201M-DIN-M12-D01 |
1 |
DC |
9-36V |
WD-1201M-DIN-M12-D02 |
1 |
DC |
18-75V |
WD-1201M-DIN-M12-D03 |
1 |
DC |
100-700V |